FK 111 G is a two-component solvented aromatic polyurethane roll-on floor coating (1:1 volume ratio) engineered for superior abrasion resistance (max 18mg loss CS17/1000 cycles per ASTM D4060-2019) and high tensile strength (≥25 MPa) in interior light/moderate engineering applications, delivering glossy RAL shade finishes over epoxy/EPU undercoats. With 70% volume solids, excellent chemical resistance to water, detergents, alkalis, and acids, pull-off adhesion (≥2 MPa concrete failure per ASTM D7234-2022), 15% elongation, and low slip potential (45-50 PTV per EN 13036-4), it covers 6 m²/L @100µm DFT (2 coats), providing fast curing (surface dry ≥30 min) for maintenance and chemical spillage areas. Applied over Cipoxy 17/18 primer on CSP 2-3 concrete or abraded resin floors (recoat within 4-8hrs), it ensures durable, bond-enhanced performance meeting FeRFA/EFNARC standards. Contact Futurelayers to buy FK 111 G at the best price, latest rate, or bulk deal from our trusted dealer, distributor, retailer, supplier, applicator, contractor, technical service engineer and wholesaler network.
Pot life 90 min @27°C; 24hr hard dry; 5/20L packs; no thinners added.
Uses
-
Glossy abrasion-resistant topcoat for engineering workshops.
-
Maintenance overcoat on existing epoxy flooring.
-
Chemical spillage protection in moderate industrial areas.
-
High-strength finish for light manufacturing floors.
Pack Size
Standard: 5L and 20L packs (resin + hardener).
Contact Futurelayers today for expert solutions in waterproofing, flooring, repair, and refurbishment of buildings and industries. Buy FK 111 G at the best price/lowest price with bulk order deals.
