Buy Armaid Grind 2

AquaArm WonderCoat

Elastomeric Waterproof Decorative Coating for vertical surfaces
⬇️ PRODUCT DATA SHEET

SKU: AquaArmWonderCoat Category: Tags: , , , , Brand:
Add to Wishlist
Add to Wishlist

AquaArm WonderCoat is a single-component, water-based elastomeric acrylic waterproof coating designed for vertical surfaces. Surpassing the waterproofing capabilities of regular paint, it forms an effective barrier against water penetration while maintaining flexibility and UV stability. This coating is ideal for waterproofing and decorating exterior walls, roof chajjas, parapet walls, and asbestos cement sheets (using scrim cloth or Aso Joint Tape reinforcement at joints and overlaps). AquaArm WonderCoat is breathable, allowing moisture vapor to escape, and cures to a permanently flexible, resilient surface that resists a wide range of temperatures.​

Uses

  • Waterproofing and decorating exterior walls of buildings

  • Effective on RCC surfaces including roofs, chajjas, and parapet walls

  • Waterproofing asbestos cement sheet roofs with reinforcement

  • Acting as a damp proof course under masonry layers

  • Suitable for interior and exterior waterproofing requiring UV stability and reflective properties

Pack Size

  • Available in 3 kg, 13 kg, and 25 kg packs

    Contact Futurelayers today for expert waterproofing and decorative coating solutions.
    Buy AquaArm WonderCoat at the best price with access to bulk order discounts, trusted dealers, distributors, and certified applicators.

Application Methodology

Step 1: Surface Preparation
Clean surfaces thoroughly using wire brushing or high-pressure water jetting to remove laitance, dust, algae, oil, grease, and loose materials.
Fill cracks over 2 mm and up to 5 mm width with Crack Filling Compound or Rearm Krack Fill paste/powder. For wider cracks and separation gaps above 5 mm, open to a “V” cut and fill with Rearm Bond Latex-modified mortar.

Step 2: Priming
Dilute one part AquaArm WonderCoat with one part clean water and apply evenly using a brush.

Step 3: Application
Use AquaArm WonderCoat directly from the container. Stir well before use.
Apply two coats of topcoat for uniform coverage: the second coat perpendicularly or within one hour of the first becoming tack-free.
Allow a full air cure of 7 days before any further surface work.
Protect surfaces from rain, dust, and direct sunlight during curing.

BOQ Specifications

Parameter Value
Nature Single component emulsion paint (White)
Specific Gravity 1.35 ± 0.02
Solid Content 65%
Surface Dry Time 30 minutes
Full Dry Time 7 days
Sheen Level Up to 6-10 at 60° gloss
Elongation (28 days @ 30°C) >100% at 1 mm thickness
Accelerated Weathering Passes 700 hrs QUV exposure
Tensile Strength (28 days @ 30°C) >0.7 N/mm²
Crack Bridging Ability Up to 1.5 mm
Pull Out Bond Strength >0.7 N/mm²
Water Permeability Resists up to 2 bar water pressure (DIN 1048)
Application Temperature Minimum +5°C, Maximum +42°C
Service Temperature -10°C to +45°C
Coverage 1 kg covers approximately 2 m² @ 200 microns DFT
Packaging 3 kg, 13 kg & 25 kg packs

Reviews

There are no reviews yet.

Be the first to review “AquaArm WonderCoat”

Your email address will not be published. Required fields are marked *

Related products